The selection of high-temperature pyrolysis gasifier is a relatively complicated process. As a professional manufacturer of incinerators, we would like to share with you a few precautions:

The reliability of the operation of the waste incinerator is related to the selected raw materials, and at the same time, it is restricted by the layout of the moving parts of the incinerator itself. The layout of the converter is a steel shell lined with thick refractory materials. There are no moving parts inside, so there is no doubt about wear and slag blockage. However, the wear of parts and slag blockage of the grate furnace need to be considered.

Secondly, the operation of the incinerator needs to be considered. Regarding the converter, you probably always pay attention to the speed of the feeder, control the residence time, adjust the drum speed and air flow, etc. Regarding the grate furnace, it is necessary to control the feeding speed, the air distribution of the grate, the amount and temperature of the air entering the grate, and the speed of the grate movement.

It is also affected by the customer's personal judgment on depicting the waste heat boiler. Regarding the grate furnace, because it is operating at a high temperature, the boiler described needs to be placed together for comparison. The converters described by some manufacturers are all combusted in the combustion system. The exhaust gas is usually 900-1000℃. The waste heat boiler of the incinerator is of a larger scale. It is recommended to choose a different boiler according to the demand for energy recovery. type. In short, the choice of incinerator type is a very messy question, and it is necessary to think about various factors.

Choose Holyshield as the incinerator. Our main products include household waste incinerators, industrial waste incinerators, animal carcasses incinerators, medical waste incinerators, etc. We have rich experience to help you customize an incinerator that is more suitable for you.