In August 2009, the resource utilization method waste incinerator was approved for the application of new technology of environmental protection and energy saving in Guizhou; in June 2010, it was awarded the product innovation in my country; in May 2010, it was awarded the product of the National Torch Program. Holy Shield will introduce you to its 7 major advantages:
(1) Wide application coverage: Resource utilization method waste incinerators include single-furnace incineration method, double-furnace incineration method, three-furnace incineration method and multi-furnace incineration method, etc., to meet the needs of large, medium and small urban areas, small towns and rural life Waste incineration solution and medical waste solution.
(2) No gasoline, diesel and natural gas, saving resources: this incinerator can convert waste into natural gas without the use of diesel engines, fuel oil, gas, liquefied petroleum gas, and liquefied gas, and the natural gas is in the oxidation tower behind the furnace. Burning air oxidizes the soot, which greatly saves the diesel engine or gas, and reduces the operating cost.
(3) Resource recycling: using waste to treat waste, resource utilization The furnace can put all the waste generated every day into the furnace at one time, and under the closed standard, this waste can be generated into flammable gas, which This flammable gas is not only used to oxidize the smoke and dust in the high-temperature air after the furnace, but also the waste heat can be recovered by the giant waste management center to boil the bath or promote the power generation of the steam turbine, thus completing the waste treatment, resource utilization, and green economy. the destination.

(4) Low labor cost: The furnace avoids the outdated method that traditional incinerators must frequently feed materials, and chooses 24-hour garbage to enter the furnace at one time. In a closed environment, the garbage is ignited within 3 to 10 seconds. , the garbage in the furnace is automatically ignited and converted into natural gas, and the whole process of subsequent combustion processing is calculated. All only use self-starting, no need for additional operation by personnel, so that the actual operating staff saves costs.
(5) No secondary pollution: The machinery and equipment operate in a closed manner. After the garbage is burned, it operates under a closed micro-negative pressure condition. There is no odor outflow and no secondary pollution. It maintains the actual operating staff and is beneficial to the ecological environment around the incinerator. Protect.
(6) Low equipment failure rate: The resource utilization method waste incinerator does not need to rotate the grate, which reduces the common failures of machinery and equipment. Waste incineration is carried out under high temperature standards. All rotating machinery and equipment operate under high temperature standards in the furnace. The failure rate of equipment is high, and the application cycle is short. Therefore, the furnace has changed the traditional incineration method and does not need to rotate the grate sheet to avoid high temperature standards. equipment failures, and prolong the service life of machinery and equipment.
(7) Save operating costs: The traditional incinerator uses the actual operating staff standing beside the furnace to continuously deliver garbage into the furnace. The actual operation is complicated and the management method is complicated. Moreover, it is necessary to open the furnace mouth when garbage is often added, which leads to additional consumption of energy. In addition, once the furnace mouth is opened, harmful and harmful substances will eventually be released in the furnace, which will cause physical and psychological damage to the actual operating staff, and will also affect the surrounding environment. Environmental protection produces harmful and harmful environmental pollution. The resource utilization method waste incinerator operates in a closed manner under the standard of no diesel, fuel oil, partial oil, gas, and liquefied gas. There is no need to open the furnace mouth, no energy outflow, no energy consumption, saving operating costs, and reducing operation. Cost, no secondary pollution.
Holy Shield is a professional incinerator manufacturer, providing a full range of waste treatment solutions, professional technical support and installation guidance. If you are also interested in this incinerator, please contact us.